Viscosity machines

Our main partner is PSL-Rheotek who specializes in petroleum products, polymers and pulp viscosity according to international standards such as ISO, DIN, ASTM and IP.

JETVISC

The determination of kinematic viscosity at less than 0 º C :

• jet fuels
• transformer oils
• brake fluids
• low-temperature lubricants;

Test methods:

• ASTM D455 standard method for the determination of kinematic viscosity
• ISO 3104 Petroleum products - Determination of kinematic viscosity
• IP 71 Part 1 Kinematic viscosity

Additional Information:
PSL Rheotek JETVISC consists of a low, below 0 º C bath unit with a built-in expansion module and touch screen control. The drainage time is determined by the ASTM Ubbelohde precise viscosity tube. Cleaning is performed automatically within the tube in place. The results are fully in accordance with ASTM, IP71 and ISO 3104.

* The measuring range is determined by the choice of the tube.

Back to top

Multi KV

The determination of kinematic viscosity at less than 0 º C as well as at higher temperatures

• jet fuels
• transformer oils
• brake fluids
• low-temperature lubricants;
• diesel oil
• raw fuel oil
• base oils
• lubricants

Additional Information:

The PSL Rheotek Multi-INT consists of a low, below 0 º C in temperature, bath unit with a built-in expansion module and the AUTO INT bath module as well as a touch screen controller. Three of the samples can be determined simultaneously within two different bath units. The drainage time is determined by the ASTM Ubbelohde precision viscosity tube. Cleaning is performed automatically within the tubes in place. The results are fully in accordance with ASTM, IP71 and ISO 3104.

* The measuring range is determined by the choice of the tube. ** Temperature range is defined thanks to the bath module

Test methods:

• The ASTM D455 standard method for the determination of kinematic viscosity
• ISO 3104 Petroleum products - Determination of kinematic viscosity
• IP 71 Part 1 Kinematic viscosity

Back to top

Auto KV

Transparent and opaque oil products used to determine the kinematic viscosity of petroleum products, include base oils, various types of oil products, distillates and fuel oils

Test methods:

• The ASTM D455 standard method for the determination of kinematic viscosity
• ISO 3104 Petroleum products - Determination of kinematic viscosity
• IP 71 Part 1 Kinematic viscosity

Additional Information:

PSL Rheotek Auto INT is made up of a safety temperature bath with a built-in cooling coil (the chiller is required separately) and a touch-screen controller. Each Auto INT module has two measurement locations. The drainage time is determined by the ASTM Ubbelohde precise viscosity tube. Cleaning is performed automatically when the pipes are in place. The results are fully in accordance with ASTM, IP71 and ISO 3104.

* The measuring range is determined by the choice of the tube.

Back to top

AV2.5 Kv - FUELS

The AV2.5 viscosity machine is available with several different configurations, such as the AV2.5 INT - FUELS, AV2.5 KV - LUBES and AV2.5 DV

It is suitable for distillates, heavy fuel oil and marine fuels in product to determine the viscosity

AV2.5 INT - FUELS can be adjusted to determine the viscosity at 40 ° C, 50, 80, or 100 ° C. The Peltiercooling system is also suitable at 20 ° C. The AV2.5 INT FUELS is optimized to handle both transparent and opaque fuels. Features: heated sample block, in-line filter, fluorine, polymer and a solvent

Specifications:
ASTM D975, EN 590, ISO 8217, ASTM D396

Test Method:
IP 543 Automatic Capillary Tube Method

Accuracy:

• The ASTM D455 standard method for the determination of kinematic viscosity
• ISO 3104 Petroleum products - Determination of kinematic viscosity
• IP 71 Part 1 Kinematic viscosity

The AV2.5 International LUBES can be adjusted to determine the viscosity of both new and used oils at 40 ° C or 100 ° C or at the same time at both temperatures.

The AV2.5 DV viscosity machine can be used to determine the dynamic viscosity of the clear or turbid solutions, including petroleum products, and polymer solutions. The AV2.5 DV may be adjusted to measure the dynamic viscosity of 40 - 100 ° C or 20-30 ° C. when using a Peltier cooler, which is available as an optional feature

Back to top

PSL Rheotek RPV-1

The PSL Rheotek RPV-1 viscosity machine for polymers and pulp is available in various versions. It is well suited for many polymers such as PA, PET, PLA PVC, PBT, PC, PE, PP, cellulose acetate, ink, biopolymers, etc. to determine a solution viscosity. Solvents can be acids, organic solvents or water.

It can also be integrated into a sample preparation module SP1ja RSS auto sampler and sample dissolution unit

Additional Information:

• The PSL Rheotek RPV-1 is a reliable and accurate device for measuring dilute polymer solutions and CED cent (Cupryethylenediamine) dissolved in cellulose viscosity
• The RPV-1 automates the manual steps specified in the standard, thus minimizing variations in results. The assembly may include 1 - 4 measuring positions
• The drainage time is measured according to ASTM automatically using an Ubbelohde viscosity tube, supplied with a ISO17025 calibration.
• For cleaning the pipes need not be removed from the device, but this will take place automatically upon completion of the measurement safely by using the vacuum.
• The versatile RPV-1 program stores all measurement data and calculates the results of a wide range of different standards.

Back to top

Viscosity bath TCB-7

Glass capillary viscosity tube

Contact us for more details!

Back to top

NOTE!
We do not accept tenders sent via Nordicnet!